Hydraulic Starter: Smart-R-Valve Series by Pow-R-Quik
home » hydraulic starters » smart-r-valve
Pow-R-Quik

Smart-R-Valve Technical Info.
Smart-R-Valve
HS-223 Series
HS-360 Series

USA Toll Free Phone
800-537-7444
» Email Us «

 

The higher the
system pressure
the more you need
Smart-R-Valve™

Smart-R-Valve ~ The Soft Engagement Valve
Say Goodbye to Pressure Spikes That Hammer Your Hydraulic Starters
!

PRQ now offers starters with Smart-R-Valve installed and tested at the factory. Both HS-22 and HS-36 series are offered with this amazing product. Prevent down time with this easy to install ready to go right out of the box starter. There is nothing to adjust and nothing to worry about. Get Smart-R-Valve.

The Smart-R-Valve™ Advantage: Ed Z., a Test Engineer and Pow-R-Quik customer says: “We set up our test rig so we could break the starter drive and the nose cone of our test starter with just one cycle. With the addition of the Smart-R-Valve™ to the rig with the same pressures and flow we have gone thousands of cycles and the pinion and the drive looks like new.”click pic

Smart-R-Valve components tested over a million cycles in a superior product

  • NO MORE broken ring gears
  • NO MORE broken drives
  • NO MORE broken nosecones
  • NO MORE downtime
  • Eliminates pressure spikes
  • PreEngages the pinion to ring gear
  • No adjustments, works to 40 degrees below zero

Smart-R-Valve

  • Adjustments and settings
  • None required

Smart-R-Valve Models Available:

HS-223 Series Starters:

  • P/N 6-10-603
  • Flow rating: 40 GPM
  • Fluids: Mineral Based or Synthetics
  • Viscosity: 7.4 to 420 cSt (50 to 2000 SUS)
  • Consult factory for extreme ambient temperature applications
  • Max Operating Pressure: 3300 PSI (227 Bar)
  • Temperature Range:-40° to 180° F
  • Seal material
  • Viscosity: 7.4 to 420 cSt (50 to 2000 SUS)

HS-360 Series Starters:

  • P/N 6-10-601
  • Flow rating: 40 GPM
  • Fluids: Mineral Based or Synthetics
  • Viscosity: 7.4 to 420 cSt (50 to 2000 SUS)
  • Consult factory for extreme ambient temperature applications
  • P/N 6-10-601
  • Flow rating: 40 GPM
  • Fluids: Mineral based or Synthetics
  • Viscosity: 7.4 to 420 cSt (50 to 2000 SUS)

Smart-R-Porting
Fluid Cleanliness
  • SAE 06:"DR" Drain Port
  • SAE 16: "P"- Pump Port
  • SAE 16; "S"- Starter Port
  • ALL SAE ports are Straight Threaded O-ring Boss (ORB)
  • Recommended oil cleanliness level: 15/13/11
  • Return filter 10 micron or finer with a beta ratio greater than or equal to 200
  • The common cause of valve failure is due to fluid contamination

To ORDER or to Request MORE INFORMATION, please contact Pow-R-Quik today!
— call 800-537-7444 (USA toll free) or click here to email us

Don't Miss These Deals!

Heavy Duty Engine Starting Systems by Pow-R-Quik • A Division of The Maradyne Corporation

Pow-R-Quik • Cleveland, Ohio   USA
USA Toll Free 800-537-7444  • Cleveland, Ohio 216-362-0755
» Log-In — © 2000-2011 - All Rights Reserved — Maradyne Corporation's Pow-R-Quik Division is a Dreison International Company — » Site Map

Thank You For Visiting Pow-R-Quik Heavy Duty Air/Gas Starters
click to return HOME